Business owners who put garland up on their building need to understand one thing: it is seen from the sidewalk, the parking lot or across the street. A run that looks full and luscious up close can look thin from a distance, and a strand of garland that comes up short on a column is hard to hide. Most “how much garland” advice is written for mantels and staircases at home. This guide is for entrances, building fronts, railings, columns and light poles.
Measure your space first, then use the rules below. When in doubt, order a little more. A few extra feet is easy to tuck in; a run that is 3 feet short is not.
The short answer
- Entrance or doorway: both sides plus the top. For a door opening 10 ft tall and 8 ft wide, that is about 28 ft.
- Straight run along a railing, ledge or fence: the length of the run, plus a few extra feet for corners and ends.
- Swagged run (garland dipping between points): about 1.5 times the length of the run.
- Columns: depends on how wide the column is. With wraps 3 ft apart, a 10 ft column needs about 14 ft of garland if it is 12 in wide, and about 23 ft if it is 24 in wide. See the column table below.
- Light poles: one 15 ft pole trim kit per pole. On a 6 in pole, it covers about 13 ft of pole with wraps 3 ft apart.
How to measure for garland
- Follow the route the garland will take, not just the size of the wall or door. Measure up, across and down, and around anything it wraps.
- Add for corners and ends. Allow a foot or two at each end if the garland drops down or tucks behind something.
- Decide straight or swagged. A swag needs about 50 percent more garland than a straight run.
- Do the string test for curves and wraps. Run a piece of string along the route the way the garland will hang, then measure the string.
- Measure each run on its own, then round each one up to whole pieces. Leftovers from one run rarely fill a gap in another.
- Double check your measurements before you order.
How much garland by location
Entrances and doors
Measure up one side, across the top and down the other side. For a door opening 10 ft tall and 8 ft wide: 10 + 8 + 10 = 28 ft. For an arched entrance, measure the curve with a string, or allow about 1.5 times the width for the arch. For double doors and wide storefront entrances, measure across the full opening, including the trim.

Keep garland clear of the door swing, door closers and any signs or cameras above the entrance.
Building fronts and between windows
Measure each span on its own: along a ledge, under a cornice or between windows. Straight runs need the span plus a little for the ends. Swags between windows or anchor points need about 1.5 times the span. On a long facade, plan matching runs so every window or bay looks the same.

Railings and fences
| Style | Garland needed | Example: 30 ft railing |
|---|---|---|
| Straight along the top rail | Length of the railing + a few feet | About 32 ft |
| Swagged between posts | About 1.5 times the length | About 45 ft |
| Wrapped around the rail | About 2 times the length | About 60 ft |

Columns
The usual home rule, “double the column height”, only works for narrow posts. A garland that spirals around a wide column travels much farther on each wrap, so how wide the column is matters as much as its height. We recommend wraps about 3 ft apart. The table shows feet of garland for every 10 feet of column height.
| Column width | Round column | Square column |
|---|---|---|
| 12 in | 14 ft | 17 ft |
| 18 in | 19 ft | 22 ft |
| 24 in | 23 ft | 28 ft |
| 36 in | 33 ft | 41 ft |
For other heights, scale the number. A 15 ft column is 1.5 times the table value. Add about 10 percent for ties and the ends. Wraps closer than 3 ft look fuller but use more garland.
Example: two round columns, 18 in wide and 12 ft tall, with wraps 3 ft apart. Each needs about 22 ft, plus 10 percent, so about 25 ft per column.
Light poles
Plan one pole trim kit per pole. With wraps about 3 ft apart, one 15 ft kit covers about 14 ft of a 4 in pole, 13 ft of a 6 in pole and 12 ft of an 8 in pole. Thicker poles need more. Wrap every pole the same way so the whole street matches.
Our Garland Pole Trim Kits are 15 ft long and 14 in wide, with nylon ties, lit or unlit. For poles that need a wreath or a lit display instead, see our wreath pole mount decorations.
Arches and lobby staircases
For an arch, measure the curve with a string. For a lobby staircase, swagged garland needs about 1.5 to 2 times the length of the handrail. Keep handrails usable and walkways clear.
Choosing the right garland
The farther away people see the garland, the fuller it should be. Here is what we recommend for each spot.
| Where it goes | Suggested garland | Inside or outside |
|---|---|---|
| Entrances, doors, railings and staircases | Taiga® garland, 9 ft x 14 in pieces, lit or unlit | Inside and outside |
| Building fronts, long runs and large columns seen from a distance | 14 in Double Branch, sold by the foot, lit or unlit | Inside or outside |
| Lobbies, atriums and indoor staircases | 16 in Bullpine Two Tone with ornaments, sold by the foot | Best inside |
| Light poles | Garland Pole Trim Kits, 15 ft x 14 in | Outside, one kit per pole |
Ordering with our garland
Our garland comes three ways. Choose based on how long your runs are and how soon you need it.
- 9 ft pieces (Taiga®). Divide each run by 9 and round up. Allow a few inches of overlap at each join. Order online with Shop Now. Taiga® garland ships the same day.
- Sold by the foot (Double Branch and Bullpine). Tell us the length of each run and we cut it to fit. Good for long runs and exact lengths. It comes from our manufacturer and ships in 3 to 6 weeks, so order early.
- Pole trim kits. 15 ft long, one per pole.
Worked example: a storefront
| Area | How it is measured | Garland needed | 9 ft Taiga pieces |
|---|---|---|---|
| Entrance, 10 ft tall x 8 ft wide | 10 + 8 + 10, plus 1 ft at each end | 30 ft | 4 |
| Two round columns, 18 in wide, 12 ft tall, wraps 3 ft apart | 22 ft each + 10% | 25 ft each | 3 each (6) |
| Front railing, 30 ft, swagged | 30 x 1.5, plus overlap at joins | About 47 ft | 6 |
| Total | About 127 ft | 16 pieces |
Prefer exact lengths? The same storefront by the foot would be about 30 ft, two runs of 25 ft and about 45 ft.
Lit or unlit, connecting and power
Pre-lit garland saves installation time and gives an even glow at night. Our pre-lit garland connects end to end, so you can run up to 20 lengths together. This includes lit garland sold by the foot. Unlit garland suits spaces with their own lighting.
Plan each lit run so it starts near an outlet. Outdoors, use outdoor-rated cords and GFCI-protected outlets. For the power needs of a specific garland, contact our team.
Outdoor installation notes
- Wind: secure garland at regular points so it cannot lift or swing. Pre-lit and decorated garland is heavier and needs more support.
- Brick and stone: light garland can hang on brick clips; heavy, lit or overhead garland needs masonry anchors or a professional installer.
- Clearance: keep doors, walkways, signs and lights clear. Over sidewalks and streets, leave enough height for people and vehicles.
Matching garland with wreaths and bows
Garland, wreaths and bows look best when they match: the same greenery, lights and bow color. Our Taiga® garland matches our Taiga® wreaths. For wreath and bow sizes, see our wreath and bow size guide, and pick bows from our commercial Christmas bows.
Ordering checklist
- Locations: each entrance, span, railing, column and pole.
- Measurements: length of each run; column width and height; pole size; all double-checked.
- Style: straight, swagged or wrapped.
- Viewing distance: up close or across a street.
- Garland type and width.
- Lit or unlit, and where the outlets are.
- Mounting surface: brick, stone, metal or wood.
- Matching wreaths and bows, if any.
- Photos of each area, with measurements marked if you can.
- Install date.
Example of what to send our team
“We want lit garland on our storefront: around the entrance (10 ft tall, 8 ft wide), up two round columns (18 in wide, 12 ft tall) and swagged along a 30 ft railing. The outlet is beside the door. We need it to arrive by November 24th so we can put it up on November 25th. Photos attached.”
With this, our team can suggest the garland, lengths and quantities in one reply.
Frequently asked questions
How much garland do I need for a column?
It depends on the column’s width, not just its height. With wraps about 3 ft apart, every 10 ft of height needs about 14 ft of garland on a 12 in round column and about 23 ft on a 24 in round column. Square columns need a little more. Add about 10 percent for ties and ends.
How much garland do I need for a storefront entrance?
Measure up one side, across the top and down the other side, then add a foot or two at each end. A door opening 10 ft tall and 8 ft wide needs about 30 ft, or four 9 ft pieces.
How much garland does it take to wrap a light pole?
Plan one of our 15 ft Garland Pole Trim Kits per pole. With wraps about 3 ft apart, one kit covers about 13 ft of a 6 in pole.
Can commercial garland be connected end to end?
Yes. Our pre-lit garland, including lit garland sold by the foot, connects end to end, up to 20 lengths. Overlap the ends a few inches and tie them together so the joins do not show.
Find the right garland
For Taiga® garland you can order online: Shop Commercial Christmas Garland.
For garland sold by the foot, pole trim kits and larger projects: Request a Quote with your measurements and photos.
Planning wreaths and bows too? See our wreath and bow size guide.

